4 inch – Z vent garage heater venting kit

Description

This kit contains the components you need all in one box. This simple kit includes a variety of 4-inch Horizontal Vent Kit This kit includes:

• (1) 4 Inch x 1 Ft. Z-Vent Single Wall Pipe
• (1) 4 Inch x 3 Ft. Z-Vent Single Wall Pipe
• (1) 4 Inch Z-Vent z-Vent Adapter
• (1) 4 Inch Z-Vent Horizontal Termination Tee
• (1) 4 Inch Z-Vent Adjustable Wall Thimble
• (1) 4 Inch Z-Vent Connector

Z-Vent Features:

• Gasketed connections
• No sealant required, no cure time, or no call backs
• Air tight seam, smooth finish, better fit
• Metallic special gas vent cut to length on site
• Highest pressure rating in the industry greater than five time the industry standard

Z-Flex 4 Inch x 1 Ft. Z-Vent Single Wall Pipe

This Z-Vent Single Wall Pipe has a silicon gasket and integral gear clamp on the female end, the male end can be cut to size with a hacksaw.

Z-Flex 4 Inch x 3 Ft. Z-Vent Single Wall Pipe

This Z-Vent Single Wall Pipe has a silicon gasket and integral gear clamp on the female end, the male end can be cut to size with a hacksaw.

• Air tight seam
• Gasketed connections
• No sealant required
• High pressure rating

Z-Flex 4 Inch Connector

This Z-Vent Single Wall Pipe has a silicon gasket and integral gear clamp on the female end, the male end can be cut to size with a hacksaw.

4 Inch Z-Flex  Adapter

The Z-Vent 4-inch Adapter. It is suitable for both positive and negative pressure applications.

• Material: Inner and outer wall constructed from AL29-4C stainless steel
• Diameter: 4 inches
• Pressure rating: Positive and negative
• Application: Can be used with flat roof or chimney applications

• Simple gasketed connection - no sealant needed
• Highest pressure rating in the industry
• Compatible with all types of Z-Flex Z-Vent
• Factory-built and engineered for durability and performance

4 Inch Z-Flex Horizontal Termination Tee

The Z-Vent 2svsttf03 is a 4-inch horizontal termination tee fitting made from stainless steel. This termination tee can be used as either an intake or an exhaust piece. It has a bird screen to keep animals out of your exhaust system.

• Material: Stainless steel
• Size: 4 inches
• Tee openings can be positioned up and down or left to right.

4 Inch Z-Flex Adjustable Wall Thimble

The 4-inch wall thimble is used for many single wall pipe, horizontal vent exhaust applications. This 4-inch wall thimble is a rigid pipe, using Category III Stainless Steel. The 4-inch wall thimble is adjustable from 4" to 7" and has dimensions of 8" x 8".

• Material: Category III stainless steel
• Size: 4-inch diameter, adjustable from 4" to 7" wall thickness