Factory Authorized Parts™ – Blower Motor – ECM 120/240 VAC 1,300 RPM 1 HP Item: 58MV660005 MFR: 58MV660005

Factory Authorized Parts™ - Blower Motor - ECM 120/240 VAC 1,300 RPM 1 HP

Item: 58MV660005

MFR: 58MV660005

Description

When looking for replacement motors, look no further than our Factory Authorized Parts (FAP)! FAP are designed to meet exact Carrier® Corporation specifications, ensuring optimum system performance, proven reliability, easy installation and maintenance and safe system operation. FAP Features

• Improved Efficiency - Motor runs at most efficient portion of motor performance curve by design
• Ensures motor is not overloaded
• Ensures that motor operates at the design RPM, which produces the correct airflow
• Reduced System Vibration - System design put motor RPM at optimal point for limiting torque pulsations that can generate excess vibration in the unit
• Reduced Noise - System qualification includes additional testing such as start/stop and pure tone noise identification which further ensures there is not excessive vibration or noise during unit operation.
• Overall length of motor assures that fan is located at intended position to minimize sound and maximize airflow
• Reduced stress on components
• Natural frequencies of the top system are determined through design process.
• Motor operating frequencies are designed away from these resonances
• Reduced wear on system
• Motors tested to Temprise standard, stricter than required by UL 1995.
• Motors must meet maximum winding temperatures required by UL at higher ambient and wider voltage ranges (RES-SPL-CQR-0012A)
• Stringent design-life testing provides longer life 100,000 on/off cycles and 50,000 total running hours; 15 years.
• Reliability Testing Regimen - Each motor chassis design goes through internal and supplier testing including salt spray, torture, life, and operational envelope testing. (CC14BD002 and Alternating Current Fan Motor Standard)
• Raceway Connections - FAP motors have liquid tight connector for lead exit that connects to raceway.
• Wire Terminations and Lengths - Wire terminations are the same as production motors so no termination is necessary. Wire lengths reach required end points without alteration.
• Fewer On-site Modifications required - Fan guards and top covers are designed to accept FAP motors without modification.
• Exact size fit means easiest access.
• Few Hardware issues - Hardware used to mount and secure original motor can be used to mount replacement motor UL & CSA Qualified Both the CBP unit and the FAP motor are UL & CSA qualified. Using the FAP motor maintains UL & CSA qualification of the equipment

• Specifications

  Dimensions Length 11 inches (in) Width 11 inches (in) Height 11.75 inches (in) Weight 17.85 pounds (lbs) Attributes Amps 7.4-12.8 Brand Factory Authorized Parts CSA Listing Yes Country of Origin MEX Cubic Measurement 0.8228 Cycle/Hertz 60 Hz Dimensional Weight 10 Duty (S1) Continuous Running Duty Full Load Amps 7.4-12.8 GTIN 00822529339009 Insulation Class F Motor HP 1 HP Motor Type ECM (Electronically Commutated Motor) NEMA Frame 39 Phase Single Prop 65 No RPM 1,300 Rotation Reversible Shaft Diameter 1/2" Shaft Length 3 15/16" UOM EA UPC 822529339009 Voltage 120/240 VAC